CHAPTER 2: I NSTALLATION 5Example:route add 192.168.0.192 15.128.122.12 -interface8. On the command line interface, type: ping 192.168.0.192.a. If this command successfully produces a reply from the Dominion SX unit, please proceed to step9.b. If this does not produce a reply, verify that the default IP address is entered correctly and there is aroute to that IP address.9. Use the installation computer to connect to the unit, typing the factory default IP address192.168.0.192 in the installation computer Web browser’s address line. Once you have reached theunit’s initial configuration screen, proceed to the Initial Software Configuration section that follows.Initial Software ConfigurationFigure 4 Hardware Setup for Initial Software ConfigurationUser Information:This information should be entered for each user, up to 50 user accounts, with at least one administrator foreach Dominion SX unit:• User Name: 32 characters maximum, one character minimum, spaces permitted.• Login Name: 255 characters maximum, one character minimum, no spaces.• User Type:− Administrator: Can modify configuration of the unit, has read/write access to the console window.− Operator: Cannot modify configuration of the unit (except own password), has read/write accessto the console window.− Observer: Cannot modify configuration of the unit (except own password), has read-only access tothe console window.• Information: Any additional information (text) you want associated with this user. Can be 64characters maximum, no minimum, spaces permitted.• Password: Alphanumeric text, 6–16 characters in length, no spaces. The first six characters of thepassword must contain at least two alpha and one numeric character; the first four characters cannot bethe same as the user name. Brackets ( < > ) and quotations ( “ ” ) are not allowed.Dominion SX UnitInstallationComputerBrowserCrossoverNetworkCable
