CHAPTER 4: CONSOLE FEATURES 29URL with Port Number1. Type the following URL into the browser's location bar: https:///dpa.htm− IPAddress: This is the IP Address of the unit. This can be either the actual IP address of the unitor IPAddress assigned for a modem.− “portnumber”: Port number for which a console is required.Note: https must be used for direct port access. http cannot be used.Example:https://192.168.50.81/dpa.htm?port=“1”2. The Direct Port Access display will appear.3. Enter Login Name and Password and click on the [Login] button.4. When the security warning appears (only once for the session); click on the [Yes] button.5. The console display will appear.Figure 33 Direct Port Access DisplayTo exit the application from direct port access, close the Raritan Console window and close the browserwindow (by selecting File Æ Close, or by clicking on the “X” in the top right-hand column).Error ConditionsIf the user name, password, or port number is invalid or incomplete, an error message will be displayed inthe browser.Invalid Port Specified:If the port specified in the URL is invalid, the user is requested to login again with the correct user nameand password, and a valid port number:Figure 34 Invalid Port Number Error Display
