Saeco RUBINO 200 Operation And Maintenance

61English10 - INACTIVITYIf the automatic vending machine remainsinactive for a long time it is necessary to takecertain preventive measures:- with the machine on, start the automaticemptying process of both the hydraulic circuitand the boiler (see PROGRAMMING ANDMAINTENANCE MENU in section 8).- once it is over, disconnect the machine fromthe power and hydraulic supply- disassemble the closing panel on the backof the machine.- complete the emptying of the tank with floatby removing the hose clamp located on theair-break device drain hose- once the emptying is over, refit the hoseclamp (fig.64)11 - DISMANTLINGEmpty the products and water as described inthe previous section. For dismantling, it isadvisable to disassemble the machine partsaccording to their composition - plastic, metaletc. Afterwards, deliver the divided parts to thespecialised companies. If a refrigerating unit ispresent, give it without disassembling it tocompanies authorized for the disposal of thisparticular part.- assemble the closing panel on the back ofthe machine.- unload all products from the containers- wash all the components that are in contactwith foodstuff as previously described- empty the trays from dry and liquid dumps,then clean them accurately- clean all vending machine internal andexternal surfaces with a cloth- protect the outside of the machine with plasticfilm or a bag- store in dry, sheltered environments at atemperature not lower than 1°Cfig.64For more information visit www.Gumball.com | 800-260-0010 | +1-214-550-5079