ŝ100ŞSetting up the Date / Time / Date typeƈYou can change the date and time that will be displayed on the captured images and set up thedate type.ƃSetting Date / Time & Selecting Date Format1. In any mode with the exception of Voice Recording mode,press the MENU button.2. Press the LEFT/ RIGHT button and select the [SETUP]menu tab.3. Select the [DATE&TIME] menu by pressing theUP/ DOWN button and press the RIGHT button.4. Use the UP, DOWN, LEFT, and RIGHT buttons to selectthe desired submenu value, and then press the OK button.RIGHT button : Selects the year/ month/ day/ hour/ minute date type.LEFT button : Moves the cursor to the [DATE&TIME] main menu if the cursor is at thefirst item of the date and time setup. In all other cases, the cursor will beshifted to the left of its current position.UP and DOWN buttons : Changes the setting value.5. Press the menu button twice and the menu will disappear.ƈThere is an option to include DATE/ TIME on still images.ƃDate Imprinting1. In any mode with the exception of Voice Recording mode,press the MENU button.2. Press the LEFT/ RIGHT button and select the [SETUP]menu tab.3. Select the [IMPRINT] menu by pressing the UP/ DOWNbutton and press the RIGHT button.4. Use the UP and DOWN buttons to select the desired dateimprint type, and then press the OK button.[OFF] : The DATE & TIME will not be imprinted on the image file.[DATE] : Only the DATE will be imprinted on the image file.[DATE&TIME] : The DATE & TIME will be imprinted on the image file.5. Press the menu button twice and the menu will disappear.ſ The Date & Time are imprinted at the bottom right side of the still image.ſ The date will be imprinted as a [DATE&TIME] setting.ſ TIME is imprinted in the following way : [Hour : Minute] and hours are shown using the24 hour clock.ſ If you select the continuous shooting, the date doesn’t be imprinted.Imprinting the recording dateಒൂ :Ȝ Ⴤ:OKFILEPWR SAVELANGUAGEFORMATDATE&TIME05/08/01 13:00YYYY/MM/DDSETUPƊƌPWR SAVELANGUAGEFORMATDATE&TIMEIMPRINTOFFDATEDATE&TIMESETUPBACK: SET:OKBACK: SET:OK
