ŝ103ŞSelecting Video out typeƈ The Movie output signal from the camera can be NTSC or PAL.Your choice of output will be governed by the type of device (monitor or TV, etc.) to which thecamera is connected. PAL mode can support only BDGHI.ƃ Setting the Video Out Type1. In any mode with the exception of Voice Recording mode,press the MENU button.2. Press the LEFT/ RIGHT button and select the [SETUP]menu tab.3. Select the [VIDEO] menu by pressing the UP/ DOWNbutton and press the RIGHT button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.- [VIDEO] sub menu : NTSC, PAL5. Press the menu button twice and the menu will disappear.AF LAMPSOUNDUSBLCDVIDEONTSCPALSETUPƈ Connecting to an external monitorƃ Using the AV cable with Cradle : Connect the camera and the cradle.Connect the cradle to an external monitor with thesupplied AV cable.ƃ Using the AV cable with Camera : Connect the camera to an external monitor with thesupplied AV cable.[Using the AV cable with Cradle][Using the AV cable with Camera]BACK: SET:OKYellow - VideoWhite - sound
