ŝ91ŞPictBridge[Using the USB cable with Cradle][Using the USB cable with Camera]ƈ Connecting the Camera to a Printerƃ Using the USB cable with Cradle :Connect the camera and the cradle. Connect the cradle to a printer’s USB port with thesupplied USB cable.ƃ Using the USB cable with Camera :Connect the camera to a printer’s USB port with the supplied USB cable.ſ If you selected [COMPUTER] in Step 4, when you connect the camera to your printer, the[CONNECTING COMPUTER] message will display and the connection will not beestablished. In this case, disconnect the USB cable, and then follow the procedure from Step2 and onward. Or, press the Printer button and the camera is connected to the printerdisplaying the [CONNECTING PRINTER] message. But, the camera may not connect to theprinter and turn off according to the printer manufacturer.ƈ You can use the USB cable to connect this camera to a printer that supports PictBridge (soldseparately) and print the stored images directly. Movie clips and voice files cannot be printed.ƃ Setting up the camera for connection with the printer1. In any mode with the exception of Voice Recording mode,press the MENU button.2. Press the LEFT/ RIGHT button and select [SETUP] menutab.3. Select [USB] menu by pressing the UP/ DOWN button andpress the RIGHT button.4. Select [PRINTER] menu by pressing the UP/ DOWN buttonand press the OK button.DATE&TIMEIMPRINTAF LAMPSOUNDUSBCOMPUTERPRINTERSETUPBACK: SET:OK
