ŝ27ŞƈHow to use the Program modeSelecting the automatic mode will configure the camera with optimal settings and you canmanually configure various functions.1. Select the [FULL] sub menu on the [MODE] menu(p.23).2. Select the Program mode by pressing the M (Mode)button (p.24).3. Point the camera towards the subject and composethe image by using the LCD monitor.4. Press the shutter button to capture an image. [PROGRAM mode]ƈPausing while recording a movie clip (Successive Recording)This camera allows you to temporarily stop during unwanted scenes, while recording a movieclip. Using this function, you can record your favourite scenes into a movie clip without havingto create multiple movie clips.ƃUsing Successive RecordingSteps from 1-2 are the same as those for MOVIE CLIPmode.3. Point the camera towards the subject and composethe image by using the LCD monitor. Press theshutter button and movie clips are recorded for aslong as the available recording time. Movie clips willstill be recorded if the shutter button is released.4. Press the Pause button( ) to pauserecording.5. Press the Pause button( ) again to resume the recording.6. If you wish to stop recording, press the shutter button again.ƈRecording the movie clip without voiceYou can record the movie clip without voice.Steps from 1-3 are the same as those for MOVIE CLIPmode.4. Press the Up button and the ( ) icon will displayon the LCD monitor.5. Press the shutter button and movie clip is recordedfor as long as the available recording time without voice.6. To stop the recording, press the shutter button again.[Successive recording of a movie clip ]Starting the recording mode
