Connecting an External Device (USB)ŝ102Şƈ You can select an external device to which you want to connect the camera using the USBcable.ƃ Selecting an External Device1. In any mode with the exception of Voice Recording mode,press the MENU button.2. Press the LEFT/ RIGHT button and select the [SETUP]menu tab.3. Select the [USB] menu by pressing the UP/ DOWN buttonand press the RIGHT button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.[COMPUTER] : Select this if you want to connect the camera to your PC.Refer to page 127 for instructions on how to connect the camera to yourPC.[PRINTER] : Select this if you want to connect the camera to your printer.Refer to page 91 for instructions on how to connect the camera to yourprinter.5. Press the menu button twice and the menu will disappear.DATE&TIMEIMPRINTAF LAMPSOUNDUSBCOMPUTERPRINTERSETUPƈ You can adjust the LCD brightness.ƃ Adjusting LCD Brightness1. In any mode with the exception of Voice Recording mode,press the MENU button.2. Press the LEFT/ RIGHT button and select the [SETUP]menu tab.3. Select the [LCD] menu by pressing the UP/ DOWN buttonand press the RIGHT button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.[LCD] sub menu : DARK, NORMAL, BRIGHT5. Press the menu button twice and the menu will disappear.IMPRINTAF LAMPSOUNDUSBLCDDARKNORMALBRIGHTSETUPLCD brightnessBACK: SET:OKBACK: SET:OK
