ŝ61Şƈ You can select continuous shot, and AEB (Auto Exposure Bracketing).- [SINGLE]: Take one picture only- [CONTINUOUS]: Images will be taken continuously until theshutter button is released. The shooting capacity depends onthe memory (Max : 4 shots).- [AEB] : Take three pictures in a series in different exposures:short exposure (-0.5EV), standard exposure (0.0EV) andover exposure (+0.5EV). Use the mode if it is hard to decideexposure of the object.ſ High resolution and picture quality increases file saving time, which increases stand-bytime.ſ If the [CONTINOUS] or [AEB] sub menu is selected, the flash will be off automatically.ſ If less than 3 pictures are available in the memory, the AEB shooting is not available.ſ It is best to use a tripod for the AEB shooting as the time to save each image file is longerand the blurring caused by camera shake may occur.ſ When TIFF is selected, continuous and Auto Exposure Bracketing can not be selected.Metering[ PROGRAM mode ]ƈ If you cannot obtain suitable exposure conditions, you can change the metering method totake brighter pictures.[MULTI] : Exposure will be calculated based on an averageof the available light in the image area. However,the calculation will be biased towards the centre ofthe image area. This is suitable for general use.[CENTER-WEIGHTED] : Exposure will be calculated basedon an average of the available lightin the image area. However, thecalculation will be biased towardsthe centre of the image area. Thisis suitable for taking a picture of small object like a flower or insects.[SPOT] : Only the rectangular area in the centre of the LCD monitor will be metered for light.This is suitable when the subject in the centre is exposed correctly, regardless of theback lighting.ſ If the subject is not the centre of the focus area, do not use the spot metering as this mayresult in an exposure error. In this circumstance, It is better to use exposure compensation.Continuous shot[ PROGRAM mode ]METERINGSINGLECONTINUOUSAEBSHOOTINGMULTICENTER-WEIGHTEDSPOT
