ŝ14ŞConnecting to a Power Sourceƃ Always turn off the power before taking the SAC-41 out of the mains supply.ƃ As with all mains powered devices, safety is important. Ensure that neither the cameranor Charger comes into contact with water or metallic materials.ƃ Please ensure that you use the SAC-41 with the correct specification for the camera.Failure to do so may affect your warranty.DANGERIf you have access to a mains supply, using an SAC-41 allows the camera to be used for longperiods of time.Plug the SAC-41 into the DC connection terminal on the camera or cradle.Before turning on the camera power with an SAC-41, insert the rechargeable battery that wascharged for over 10 minutes with turning off the camera.ƃ Charging with the cradle1. Insert the rechargeable battery into the batterychamber.ƈ How to charge the rechargeable battery (SLB-1237) with the SAC-41.Using the SAC-41Charging LED2. Place the camera correctly in the cradle. 3. Put the SAC-41 into your power socketand DC connection terminal of the cradle.
