Samsung ML-1650 User Manual

Also see for ML-1650 Series: Manual Product guide Service manual Service manual Technical instructions

Contents

PRINT M EDIA 4.15Printing on TransparenciesGuidelines• Only use transparencies recommended for use in laser printers.• Do not load more than 20 transparencies into the Multi-Purpose Tray at a time.• Make sure that the transparencies are not wrinkled or curled, and that they do not haveany torn edge.• Hold the transparencies by the edges and avoid touching the print side. Oils from yourfingers that are deposited on the transparency can cause print quality problems.• Be careful not to scratch or leave fingerprints on the print side.1 Open the Multi-Purpose Tray and pullthe extender out of its full-lengthposition.2 Load transparencies with print sideup, and the top with the adhesivestrip entering the printer first.Adjust the guide to fit the width of thetransparencies.3 When you print on transparencies,configure the paper source, type andsize in the software application. Fordetails, see page 5.3.Notes:• To prevent transparencies from stickingtogether, remove them from the outputtray as they are printed.• Place transparencies on a flat surfaceafter removing them from the printer.