Samsung ML-1650 User Manual

Also see for ML-1650 Series: Manual Product guide Service manual Service manual Technical instructions

Contents

5.7P RINTING TASKSPrinting on Both Sides of the Paper (Manual Duplexing)To print on both sides of the paper (manual duplexing), youmust run the paper through the printer twice. You can printusing the top output tray (face down tray) or the rear outputtray (face up tray). Samsung recommends using the topoutput tray for light-weight paper. Use the rear output tray forany heavy media or media that tends to curl when printed,such as envelopes and card stock.1 When you change the print settings from your softwareapplication, access the printer properties. See page 5.2 toaccess the printer properties.From the Paper tab, select the paper orientation, source,size and type.2 Click the Output tab, then choose Long Edge or ShortEdge from the Type drop-down list in the Manual 2 SidedPrinting section.Note: To print on both sides of the paper, you must use theMulti-Purpose Tray for the paper input source. Load paper in theMulti-Purpose Tray.Note: If you can not see LongEdge in the Type drop-downlist, set the Type box in theOutput Mode section toMultiple Pages per Side or Fitto Page.