Samsung ML-5200A User Manual

Also see for ML-5200A: Service manual

Contents

2.9Operating your printer3. Before starting your print job, make sure that you select the correctpaper size and feed source in your application. See ‘Print settings’ onpage 2.13.4. Send the data to the printer from the application. When all the data istransmitted, the PAPER light blinks.5. Press the button on the control panel. Printing starts.6. If you have more than one page to print, when the PAPER light blinks,load next sheet and press and hold the button for about 2 secondsuntil the printer pulls in the paper and starts printing.Note: If you press the button without any paper in the manual feeder, theprinter will automatically use paper in the automatic paper feeder.7. The paper exits through the face-up output slot with the printed sideup.ERROR PAPER READYNotes:• The face-up output slot may not hold the printed pages properly.• The printed pages will not stack in the face-down stacker unless you change theoutput lever position. After you finish using the face-up output slot, you mustchange the position of the output lever to the normal position by pushing up.02-Operating 3/2/00 9:36 AM Page 11