21XOA buttonWhen you press this button, you can use the XOA applications from thedisplay screen. Before using the XOA applications, they should be installed.If the XOA button is not displayed, make sure that the machine gets XOAlicense. For more information, contact your local Samsung dealer or theretailer where you purchased your machine.Power Saver ButtonWhen the machine is not in use, save electricity with the provided powersave mode. Pressing this button puts the machine into power save mode.(See "Using energy saving feature" on page 30.)If you press this button for more than two seconds, a window appears,requesting that you turn the power off. If you choose Yes, the power isturned off. This button can also be used to turn the button on.Interrupt buttonWhen you press this button, the machine goes into interrupt mode whichmeans it stops a printing job for urgent copy job. When the urgent copy jobcompletes, the previous printing job continues.MANAGING YOUR MACHINE FROM THEWEBSITEIf you have connected your machine to a network and set up TCP/IPnetwork parameters correctly, you can manage the machine via Samsung’sSyncThru™ Web Service, an embedded web server. Use SyncThru™Web Service to:• View the machine’s device information and check its current status.• Change TCP/IP parameters and set up other network parameters.• Change the printer properties.• Set the machine to send email notifications to let you know themachine’s status.• Get support for using the machine.To access SyncThru™ Web Service:1. Start a web browser, such as Internet Explorer, from Windows.2. Enter the machine IP address (http://xxx.xxx.xxx.xxx) in the addressfield and press the Enter key or click Go.Your machine’s embedded website opens.3. Click Login.The log-in window appears.4. Enter the administrator’s ID and password then click Login.5. Change the settings as you want such as the machine settings, networkparameters, etc.If the message asking Auth. ID and Password, if means the networkadministrator has set the suthentication in Syncthru WebService.(See "Managing your machine from the website" on page 21.)STATUS DESCRIPTIONOff The machine is not in the power save mode.Blue On The machine is in the low power save mode.Blink The machine is in the power save mode.STATUS DESCRIPTIONOff The machine is not in interrupt printing mode.Blue On The machine is in interrupt printing mode.Interrupt mode is resumed at default value (Off) after the machine isshut down or reset.• Enter the same administrator’s ID and password to the touchscreen.• If you do not login with administrator’s ID and password, you cansee the machine’s information only.
