42Image tab• Erase Edge: Allows you to erase punch holes, staple marks, andfold creases along any of the four documents edges. (See "Erasingedges" on page 47.)• Erase Background: Prints an image with no background. (See"Erasing background images" on page 47.)• Margin Shift: Creates a binding edge for the document. (See"Shifting margins" on page 47.)COPYING ORIGINALSThis is the normal and usual procedure for copying your originals.1. Press Copy from the Main screen.2. Place originals, face up, in the DADF, or you can use the scanner glasswith a single original document face down.3. Adjust the settings for each copy such as Original Size, Reduce/Enlarge, Duplex and more. (See "Changing the size of originals" onpage 42., see "Copying on both sides of originals (Duplex)" on page 43.)4. Select the tray by pressing the appropriate tray on screen.5. Enter the number of copies using the number keypad, if necessary.6. Press Start on the control panel to begin copying.CHANGING THE SETTINGS FOR EACH COPYOn the Basic tab of the Copy screen, you can select copy features beforestarting to copy.Changing the size of originalsPress the Basic tab > Original Size, then use left/right arrows to set theoriginal size.Press more to see the detail values.• Custom: Selects the scanning area of the original. Press thecardinal point arrows to set the size.• Auto: Automatically detects the size of originals, but this optionsupports only when originals are Legal, Letter, or A5 sized. If theoriginals is mixed-sized, then the machine detects the largest originalsize and select the largest-sized paper in the tray.• Mixed Size (Letter & Legal): Allows for the use of both of Letter andLegal sized papers together, and the machine uses the proper-sizedpaper from several trays. For example, if the originals are total 3pages, 1st page is the letter-sized paper, 2nd page is the legal-sizedIf you want to copy originals on the scanner glass and copy more thantwo copies, the message Another Page? appears after the first pagecopied. At this time, if you select No, the machine starts copying therest of your originals and sorts the copied papers in order. Becausethe default value of theOutput option is Collated.To cancel the current copy job, press Stop on the control panel. Oryou can delete the current and pending job using Job Status on thecontrol panel. Select the job you want to cancel and press Delete.The Basic tab setting is only for each copy. That means that thesetting does not apply to the next copy job. After finishing the currentcopy job, the machine automatically restores the default settings aftercertain time. Or the machine resume to default setting when you pressthe Clear All button on the control panel or when you press othermenu such as fax or else except the Job Status screen.The default copy setting can be changed in Admin Setting. (See"General settings" on page 76.)
