44Deciding the form of copy output (Collated / Staple)Press the Basic tab > Output, then use left/right arrows to select Collatedor Stapled. This feature is supported only when the original is on the DADF.Press more to see the values.• Collated: Prints output in sets to match the sequence of originals.• Uncollated: Prints output sorted into stacks of individual pages.• Staple, Portrait: Adds a single staple to all of your portrait-orientedoutput.• Staple, Landscape: Adds a single staple to all of your landscape-oriented output.Selecting the type of originalsPress the Basic tab and select an appropriate original type.• Text: Use for originals containing mostly text.• Text/Photo: Use for originals with mixed text and photographs.• Photo: Use when originals are photographs.Changing the darknessThis defines the degree of darkness. Use left/right arrows to change thelevel of light/dark in the printouts.USING SPECIAL COPY FEATURESOn the Advanced tab or the Image tab of the Copy screen, you can selectspecific copy features.ID card copyingThe machine prints one side of the original on the upper half of the paperand the other side on the lower half without reducing the size of the original.This feature is helpful for copying a small-sized item, such as a businesscard.This copy feature is available only when you place originals on the scannerglass.1. Place the front side of an original facing down on the scanner glasswhere arrows indicate as shown, and close the scanner lid.2. Press Copy from the Main screen.3. Select the tray in Paper Supply.4. Press the Advanced tab > ID Copy.5. Press Start on the control panel.Then the machine starts scanning the front side.6. Turn the original over and place it on the scanner glass, where arrowsindicate as shown. Then, close the scanner lid.7. Press Start on the control panel to begin copying.If you want to copy originals on the scanner glass and copy both sidesof originals, the message Another Page? appears after the first pagecopied. At this time, load the original's the other side facing down andpress Yes, then the machine starts scanning the second page of youroriginal.The Staple feature is available with an optional stacker & stapler. (See"Stacker & Stapler (Finisher)" on page 110.)The original must be placed on the scanner glass to use this feature.
