45Copying ID with the manual ID copy optionIf you want to copy several ID cards on a paper, or adjust the copying positionof the page, follow the next steps.Next steps are the procedure when you copy two people's driver's licensecards (100mm X 80mm) in one page.1 Press Machine Setup on the control panel.2 Select Admin Setting. When the login message pops up, then enterpassword and press OK.3 Press the Setup tab > Copy Setup > Mamual ID Copy Setup.4 Press the number from the template list table.5 Press Edit Template.6 Selec the appropriate option values and press OK.• Template Name: Enter the template name.• Scan Position: Select the position for scanning. You should select thelargest scanning position out of the originals.LEFT, TOP : X-000mm/Y-000mm, RIGHT, BOTTOM: X-110mm/Y-090mm• Number of Images: Select how many images are on a page. (selectnumber 4.)• Image Position: Select the position of a page which images are on. Ifyou choose to copy four images, you have to select four positionshere.• First Image Position: LEFT, TOP : X-000mm/Y-020mm, RIGHT,BOTTOM: X-100mm/Y-100mm• Second Image Position: LEFT, TOP : X-105mm/Y-020mm, RIGHT,BOTTOM: X-205mm/Y-100mm• Third Image Position: LEFT, TOP : X-000mm/Y-150mm, RIGHT,BOTTOM: X-100mm/Y-230mm• Forth Image Position: LEFT, TOP : X-105mm/Y-150mm, RIGHT,BOTTOM: X-205mm/Y-230mm7 Press OK, the template you have saved will be shown in the templatelist table.8 Press and select Copy.9 Press the Advanced tab > ID Copy > Mamual ID Copy Setup.10 Press the template you have saved from the template list.11 Press the Start button on the control panel. now follow the instructionon display to finish the ID copy for four images2-up or 4-up copying (N-up)The machine reduces the size of the original images and prints 2 or 4 pagesonto one sheet of paper.2 or 4-up copying is available only when you load originals into the DADF.1. Place the originals face up in the DADF. Or place a single original facedown on the scanner glass. (See "Loading originals" on page 33.)2. Press Copy from the Main screen.3. Select the tray in Paper Supply.4. Press the Advanced tab > N-Up.5. Select Off, 2Up, or 4Up.• Off: Copies an original onto one sheet of paper.• 2Up: Copies two separate originals onto one page.• 4Up: Copies four separate originals onto one page.6. Press Start on the control panel.Poster copyingYour original will be divided into 9 portions. You can paste the printed pagestogether to make one poster-sized document. This copy feature is availableonly when you place originals on the scanner glass. Each portion isscanned and printed on by one in the following order.This copy feature is available only when you place originals on the scannerglass.• If the original is larger than the printable area, some portions maynot be printed.• If this option is grayed out, select the Duplex option to 1 -> 1Sided, the Output option to Collated.You cannot adjust the copy size using the Reduce/Enlarge for the N-Up feature.1 21 23 4
