Samsung SCX4725FN Manual

Also see for SCX-4725F: Manual Del Usuario User manual

Contents

5.4 <Loading originals and print media>Media sizes supported in each modeGuidelines for selecting and storing print mediaWhen selecting or loading paper, envelopes, or other print materials,keep these guidelines in mind:• Always use print media that conform with the specifications listed onpage 5.3.• Attempting to print on damp, curled, wrinkled, or torn paper can causepaper jams and poor print quality.• For the best print quality, use only high quality copier grade paperspecifically recommended for use in laser printers.• Avoid using the following media types:- Paper with embossed lettering, perforations, or a texture that is toosmooth or too rough- Erasable bond paper- Multi-paged paper- Synthetic paper and thermally reactive paper- Carbonless paper and tracing paperUse of these types of paper could result in paper jams, chemicalsmells, and damage to your machine.• Store print media in its ream wrapper until you are ready to use it.Place cartons on pallets or shelves, not on the floor. Do not placeheavy objects on top of the paper, whether it is packaged orunpackaged. Keep it away from moisture or other conditions that cancause it to wrinkle or curl.• Store unused print media at temperatures between 15 °C and 30 °C.The relative humidity should be between 10% and 70%.• Store unused print media in a moisture-proof wrap, such as a plasticcontainer or bag, to prevent dust and moisture from contaminatingyour paper.• Load special media types one sheet at a time through the manual trayto avoid paper jams.• To prevent print media, such as transparencies and label sheets, fromsticking together, remove them as they print out.CautionIf you print 20 envelopes in succession, the surface of the rearcover may become hot. Please exercise caution.Mode Size SourceCopy mode Letter, A4, Legal, Folio,Executive, ISO B5, JISB5, A5, A6• tray• manual trayPrint mode All sizes supported bythe machine• tray• manual trayFax mode Letter, A4, Legal • tray• manual trayGuidelines for special print mediaMedia type GuidelinesEnvelopes • Successful printing on envelopes depends uponthe quality of the envelopes. When selectingenvelopes, consider the following factors:- Weight: The weight of the envelope papershould not exceed 90 g/m2 or jamming mayoccur.- Construction: Prior to printing, envelopesshould lie flat with less than 6 mm curl, andshould not contain air.- Condition: Envelopes should not be wrinkled,nicked, or otherwise damaged.- Temperature: You should use envelopes thatare compatible with the heat and pressure ofthe machine during operation.• Use only well-constructed envelopes with sharpand well creased folds.• Do not use stamped envelopes.• Do not use envelopes with clasps, snaps,windows, coated lining, self-adhesive seals, orother synthetic materials.• Do not use damaged or poorly made envelopes.• Be sure the seam at both ends of the envelopeextends all the way to the corner of theenvelope.• Envelopes with a peel-off adhesive strip or withmore than one flap that folds over to seal mustuse adhesives compatible with the machine’sfusing temperature of 180 °C for 0,1 second.The extra flaps and strips might cause wrinkling,creasing, or jams, and may even damage thefuser.• For the best print quality, position margins nocloser than 15 mm from the edges of theenvelope.• Avoid printing over the area where theenvelope’s seams meet.AcceptableUnacceptable