Samsung SCX4725FN Manual

Also see for SCX-4725F: Manual Del Usuario User manual

Contents

12.5 < Maintenance>NoteYou can set the machine to disregard the Toner EmptyReplace Toner message and to continue printing. See page12.6.1 Open the front cover.2 Pull the toner cartridge out.3 Remove the new toner cartridge from its bag.4 Remove the packing tape and roll the cartridge 5 or 6 items todistribute the toner.Thoroughly roll the cartridge to assure maximum copies percartridge. Save the box and the plastic bag for shipping.NoteIf toner gets on your clothing, wipe it off with a dry cloth andwash clothing in cold water. Hot water sets toner into fabric.CautionDo not touch the green underside of the toner cartridge.Use the handle on the cartridge to avoid touching this area.5 Hold the toner cartridge by the handle and slowly insert the cartridgeinto the opening in the machine.Tabs on the sides of the cartridge and corresponding grooves withinthe machine will guide the cartridge into the correct position until itlocks into place completely.6 Close the front cover. Make sure that the cover is securely closed.Cleaning the drumIf there are streaks or spots on your print, the OPC drum of the tonercartridge may require cleaning.1 Before starting the cleaning procedure, make sure that paper isloaded in the machine.2 Press Menu until Maintenance appears on the top line of thedisplay.3 Press Enter when Clean Drum appears.4 Press Enter when Yes appears.The machine prints out a cleaning page. Toner particles on the drumsurface are affixed to the paper.If the problem remains, repeat steps 1 through 4.Cleaning the drum automaticallyYou can set your machine to print a cleaning page automatically every600 pages.1 Press Menu until Maintenance appears on the top line of thedisplay.2 Press the Scroll buttons until Auto Cleaning appears and pressEnter.3 Press the Scroll buttons until On appears and press Enter.4 Press Stop/Clear to return to Standby mode.Sending new toner notificationYou can set your machine to automatically send a fax to your servicecompany or dealer to notify them that your machine requires a new tonercartridge when the toner cartridge needs to be replaced. The fax numberneeds to be set by your dealer prior to using this feature, otherwise themachine cannot send a notification even though you turn this service on.1 Press Menu until Maintenance appears on the top line of thedisplay.2 Press the Scroll buttons until Notify Toner appears and pressEnter.3 Press the Scroll buttons until On appears and press Enter.4 Press Stop/Clear to return to Standby mode.