32_ liveliveevenT moniTorinGThis will display the channel in sync with a specific event (Motion/Video Loss) if it occurs.In “monitor > event display”, set the event monitoring to ON/OFF and specify the event display time. (Page 50)• If multiple events occur simultaneously, the screen will switch to a split mode.- 2~4 events : 4-split mode- 5~9 events : 9-split mode- 10~16 events : 16-split mode• If the second event occurs within the set time of <event display>, the first event will last until the secondone is terminated. (Page 50)` Ex : If you set <Event Display> to 5 seconds, and only one event occurs in CH 1.` Ex : If you set <Event Display> to 5 seconds, and the second event occurs in CH 2 within the set time after the firstevent occurred in CH 1.M ` Press the [ALARM] button to reset the alarm settings and to release the event mode.` If an alarm activates in the condition you have set the event record, and pre/post alarm times, the event record will beperformed.Event occurrence 4 seconds 9 secondsStop alarmCH1 CH2CH1CH3 CH1CH1CH2CH1 CH2CH3 CH4CH1 CH2CH4 CH2CH3 CH1CH1CH3 CH1CH1CH2CH1CH1CH1CH1Event occurrence 5 secondsStop alarmCH1 CH2CH1CH3 CH1CH1CH2
