Samsung SDS-P5101 User Manual
Also see for SDS-P4080: Quick start guide
                                                                                                                                       | |
Contents
|
50_ main menumain menumonitorYou can configure information to be displayed.Setting the monitorUsing the mouse may help make setup easier.1. Use the up/down buttons ($%) in <Device> window tomove to <monitor>, and press [enTeR] button.2. Select <monitor>.3. Use direction buttons ($%_ +) to move to a desireditem, and set the value.• Event Display : Sets the dwell time of the event channeldisplay on the monitor when an event occurs.If selected <Continuous>, it displays the channel until youpress [aLaRm] button to release it.• Display : Displays only checked items on the monitor screen.• Multi CH SEQ Time : Sets the interval between automatic display switching in 4-split and 9-split mode ofthe Live screen.• VGA/HDMI : Set your preferred screen resolution to <VGa> or <HDmi>.If the monitor does not support selected resolution of <VGa> or <HDmi>, it may not display video properly.When the monitor setup is done, press <OK>.Setting Display positionSome monitors many not display information (camera name, icon, time information, etc.) about the DVR,depending on the condition. Then, you can change the display position of the data.1. In the <Device> window, press the up/down ($%) buttonto move to <monitor> and press the [enTeR] button.2. Select the <monitor> item.3. Select <Display Position Setup> in the bottom.You will move to the <Display Position Setup> window.4. Use the four direction buttons or the number buttons onthe remote control to adjust the data position.Setting the Screen modeYou can configure the Live screen and Split Screens.1. Use the up/down buttons ($%) in <Device> window tomove to <monitor>, and press [enTeR] button.2. Select <mode>.3. Use direction buttons ($%_ +) to move to a desireditem, and set the value.• Live Screen : Select split modes for the Live screen.16-, 9-, and 4-split screens are included by default.SDR-4100 doesn't support 16-split screen mode.• Play Screen : Select split modes for the playback screen.Only the 13-split screen is optional.Black shows the playback while white shows the Live screen.4. When the screen mode setup is done, press <OK>.2012-01-01 01:10:25Display Position SetupOK Cancel03033030MonitorMonitor Mode Event Display OFF Display Date Time CH Name Icon Multi CH SEQ Time 5 sec VGA/HDMI 1280x1024OK CancelDisplay Position SetupMonitorMonitorOK CancelLive PlayLive ScreenPlay ScreenMode |
Related manuals for Samsung SDS-P4080
manualsdatabase
Your AI-powered manual search engine