Samsung SDS-P5101 User Manual

Also see for SDS-P4080: Quick start guide

Contents

58_ main menumain menu5. When the backup setup is done, press <OK>.` If no available device is recognized for backup, <OK> button is not activated.J ` The application may slow down during the backup.` You can switch to the menu screen during the backup in operation, but playback of data is not available.` When a memory device is used for backup, it is not available to use the full capacity of the media because thesystem consumes a portion of its capacity.M ` Pressing the <Exit> during the backup will return to the previous menu, while the backup progresses.neTWORK COnFiGuRaTiOnIt provides networked monitoring of Live screen from a remote place, and supports mail forwarding function withevents. You can configure the network environment which enables such functions.Connection modeYou can set the network connection route and protocol.Setting the ConnectionSets the protocol and environment of the network.Using the mouse may help make setup easier.1. Press the [menu] button on the remote control.2. Use the left/right button (_ +) to select <network>.Network menu is selected.3. Use the up/down buttons ($%) to move to <Connectionmode>, and press [enTeR] button.4. Select <Connection>.A window of connection mode setup appears.5. Use direction buttons ($%_ +) to move to a desireditem, and set the value.• Connection Mode : Sets the network connection mode.• Bandwidth : Sets the maximum data flow to be transferred.(Upload speed)Options will vary depending on the selected connectionmode.- For <Static iP>, <Dynamic iP> : Select one from50 kbps ~ 2Mbps, and Unlimited.- For <aDSL>, select one from 50 kbps ~ 600 kbps.NetworkLogout ReturnConnection ModeDDNSLive TransferMailing ServiceConnection ModeConnection Protocol Connection Mode Static IP Bandwidth 2MbpsOK Cancel IP 192.168.1.200 Gateway 192.168.1.1 Subnet Mask 255.255.255.0 DNS Manual 168.126.63.1