Samsung SDS-P5101 User Manual
Also see for SDS-P4080: Quick start guide
                                                                                                                                       | |
Contents
|
English _55! main menuSeTTinG THe eVenTYou can set recording options for motion, and video loss event.motion DetectionYou can set target detection region and motion, as well as the alarm signal output.When the motion detection region is set, it detects motion within the area.Using the mouse may help make setup easier.1. Press the [menu] button on the remote control.2. Use the left/right button (◄ ►) to select <event>. Event setting menu is selected.3. Use the up/down buttons ($%) in <event> window tomove to <motion Detection>, and press [enTeR] button.A window of motion detection area setup appears.• Mode : Sets whether to activate motion detection.• Sensitivity : Sets the sensitivity level of the motion detection.• Alarm : Sets the alarm output method.` For further information on alarm output, refer to “HDD Alarm >Alarm”. (Page 49)• Alarm Duration : Sets the duration of alarm signal and alarmsound. A window of scheduled recording setup appears.4. When the motion detection setup is done, press <OK>.Setting the motion Detection area Select <motion Region>. When “motion Region” window appears, select achannel for detection and set the area of motiondetection.• To set the area in “motion Region” windowIn the “motion Region” window, select desired regionfrom < >.• To set the area using <individual> selectionIn the “motion Region” window, you can select cellsindividually by using <individual>.Motion RegionOK CancelApply to All CHCH1IndividualWhen selected <individual>, “motion Region” window disappears and you can select cells one by one.When the motion area setup is done, press the <menu> on the screen or the [menu] button on theremote control to display the “motion Region” window again.- Select : Selected cell is set to be a part of motion detection area.- Unselect : Selected cell is removed from the motion detection area.- Inverse : Unselected cells are set to be the motion detection area.- Menu : After selecting individual motion areas, move to the “motion Region” window.` If selected <Apply to All CH>, selected motion area is applied to all channels. When the motion detection setup is done, press <OK>.SelectUnselectInverseMenuMotion DetectionOK CancelPrevious/Next PageCH Mode Sensitivity Alarm Alarm Duration 1 OFF Level10[High] None 10 sec 2 OFF Level10[High] None 10 sec 3 OFF Level10[High] None 10 sec 4 OFF Level10[High] None 10 sec 5 OFF Level10[High] None 10 sec 6 OFF Level10[High] None 10 sec 7 OFF Level10[High] None 10 sec 8 OFF Level10[High] None 10 sec Motion Region |
Related manuals for Samsung SDS-P4080
manualsdatabase
Your AI-powered manual search engine