Samsung SDS-P5101 User Manual

Also see for SDS-P4080: Quick start guide

Contents

74_ main menumain menuPreset SettingA preset is a set of specific target points of a PTZ camera, and up to 127 presets per a camera can be stored.1. In PTZ Control mode, use the direction buttons to adjust the camera in a desired direction.2. Select the <Save> key.The virtual keyboard for inputting the preset will appear.` Refer to “Using Virtual Keyboard”. (Page 36)• Save : You can save the preset settings.• Rename : You can change the settings of the existing presets.• Delete : Deletes the selected preset.• Delete All : Deletes all existing presets.M ` If you replace the camera of the channel that stores the preset list with a new one, you should reset the presetaccordingly.3. Press <OK>.The preset will be saved as a name that you entered.Camera SettingA PTZ camera has its own menu system. Optimize the PTZ camera according to the DVR.1. Connect the PTZ camera to the DVR and run the PTZcamera again to display the camera’s protocol settingwindow.2. Check the protocol ID of the camera.` In “Device > Setting the PTZ”, enter the PTZ camera ID in theID input box of the channel that is connected to the PTZ camera.(Page 47)3. Select <Camera Setup> in the PTZ Control menu.The camera-specific menu appears.` You can configure the settings of only those cameras that supportthe protocols of Samsung, Pelco D/P, AD and Panasonic.` If you are setting Auto Pan or Pattern in the camera menu, pressand hold the appropriate button for a certain time so that the buttonoperation can be different from that in normal PTZ setting.2012-01-01 01:10:252012-01-01 01:10:25** MAIN MENU **CAMERA SET...VIDEO SET...PRESET...ZONE SET...AUTO SET...ALARM SET...OTHER SET...CLOCK SET...SYSTEM INFO...Camera SetupExit2012-01-01 01:10:252012-01-01 01:10:25SAMSUNG PROTOCOLADDR 0TYPE RS-485,HALFBAUD 9600LENS OK!TILT OK!PAN OK!