Samsung SDS-P5101 User Manual

Also see for SDS-P4080: Quick start guide

Contents

English _45! main menuSeTTinG THe DeViCeYou can configure the settings of: Camera, Storage Device, Remote Device and Monitor.CameraSetting the CameraYou can set Video, Audio, Channel Name and Dwell Time of a Camera.Using the mouse may help make setup easier.1. Press the [menu] button on the remote control.2. Use the left/right button (_ +) to select <Device>.Device setting menu is selected.3. Use the up/down buttons ($%) to move to <Camera>,and press [enTeR] button.4. Select <Camera>.You will see a window where you can configure thecamera settings including Video, Audio, Channel Name,SEQ-Dwell Time and Privacy Region.5. Use direction buttons ($%_ +) to move to a desireditem, and set the value.• Video- <On/OFF> : You can turn ON/OFF the selected channel’scamera.- <Covert1> : Shows information other than the video ofthe selected channel.` For privacy protection, it does not display the video while the recording continues.- <Covert2> : Shows nothing but an empty screen while the recording continues.• Audio- If set to <On>, you can turn the audio of the channel ON on the Live screen.- If set to <OFF>, the channel’s audio is off on the Live screen and not recorded.• CH Name : Up to 15 characters including blanks are allowed.` Refer to “Using Virtual Keyboard”. (Page 36)• SEQ-Dwell Time : You can set the dwell time between channels for the Live screen.` If set to <OFF>, the channel is not listed in the Auto Sequence mode.DeviceLogout ReturnCameraStorage DeviceRemote DeviceMonitorCH Video  Audio  CH Name SEQ-Dwell Time 1 ON  OFF  CAM 01 5 sec 2 ON  OFF  CAM 02 5 sec 3 ON  OFF  CAM 03 5 sec 4 ON  OFF  CAM 04 5 sec 5 ON  OFF  CAM 05 5 sec 6 ON  OFF  CAM 06 5 sec 7 ON  OFF  CAM 07 5 sec 8 ON  OFF  CAM 08 5 sec CameraPrevious/Next PageScreen SetupOK CancelCameraPrivacy Region