The Answering Machine4−7Chapter 4• When the playback is complete, you hear a short beep.You can then enter Remote Command at this point toperform necessary operation. To learn about RemoteCommands, see “Using Remote Commands” on page 4−9.If there is no key input or the wrong password is entered whilethe machine sends out beeps, and the line will bedisconnected.Setting the Message ForwardingTo have your machine forward a recorded message to yournew destination, you have to set the Message Forwarding onand enter the number where the machine to dial.To activate Message Forwarding1 Press Fax/MSG Forward until the display shows‘MSG’.2 Press Start/Enter.3 Press Fax/MSG Forward until the display shows‘ON’ and press Start/Enter.4 Enter the telephone number where the machine todial.Now, the machine will dial the designated place whenever anew incoming message is received. For information how theMessages is forwarded, see “Message Forwarding” on page4−6.To deactivate Message Forwarding1 Press Fax/MSG Forward until the display shows‘MSG’.2 Press Start/Enter.3 Press Fax/MSG Forward until the display shows‘OFF’ and press Start/Enter.
