Samsung SF-3200T User Manual

Also see for SF-3200: User guide

Contents

Special Features6−9Chapter 6RCV. STARTCODEThe RCV. START CODE (Remote Receive Start Code) allows you to startfax receive from an extension phone plugged into the EXT. LINE socket(SF−3200 only) or equivalent. If you pick up the extension phone and heara fax tone, Press the Rcv. Start Code then the fax will start receiving. Thecode is preset to * 9 * at the factory. Enter the desired code from 0 to 9.DRPD MODE(Distinctive RingPatternDetection)‘Distinctive Ring’ is a telephone company service which enables a user touse a single telephone line to answer several different telephone numbers.The particular number someone uses to call you on is identified by differentringing patterns, which consist of various combinations of long and shortringing sounds. This feature is often used by answering services whoanswer telephones for many different clients and need to know whichnumber someone is calling in on to properly answer the phone.Using the DRPD feature, your fax machine can ‘learn’ the ring pattern youdesignate to be answered by the FAX machine. Unless you change it, thisringing pattern will continue to be recognized and answered as a FAX call,and all other ringing patterns will be recognized as a normal phone call.You can easily suspend or change DRPD at any time.Before using the DRPD option, Distinctive Ring service must be installedon your telephone line by the telephone company. To set up DRPD, you willneed another telephone line at your location, or someone available to dialyour FAX number from outside.Choose ‘SET’ to setup the Ring Pattern Detection. The LCD displays‘WAITING RING’. Call your fax number from another telephone. It is notnecessary to place the call from a fax machine. When your machine beginsto ring, do not answer the call. The machine requires several rings to learnthe pattern.When the machine completes ‘learning’, the LCD displays‘END DRPD [SETUP]’.Choose ON to Activate DRPD. With the DRPD feature active, and thenDRPD mode can be accessible by pressing the Rcv. Mode button.Choose OFF to cancel DRPD if it is currently active. All calls will beanswered normally, depending on Rcv. Mode setting.DRPD must be set up again if you reassign your fax number, or connect themachine to another telephone line. After DRPD has been set up, call yourfax number again to verify that the machine answers with a fax tone, thenhave a call placed to a different number assigned to that same line to be surethe machine answers the normal phone call.ECM MODE(ErrorCorrection Mode)This mode compensates for poor line quality and ensures accurate, error−free transmission with any other ECM−equipped facsimile machine. If theline quality is poor, transmission time may be increased when ECM isenabled.Choose ON to turn Error Correction Mode on.Choose OFF to turn Error Correction Mode off.SAVE TOLLTIMETo use the Save Toll, you have to first set the time when you are going tosend a fax. Enter appropriate time in 24−hour format.Note if you do not set this up, you cannot use the Save Toll feature.Option Suboption