Care and Maintenance7−11Chapter 7Adjust ShadingThe shading is adjusted at the factory. If, however, you dropand damage your machine while moving, we recommend youadjust shading for optimized lightness.To adjust Shading, do as follows:1 Load a plain WHITE sheet of paper (no writing orgraphics) into the loading slot.• BE CAREFUL!Printing quality may be unexpectedly worse if you donot use a plain WHITE paper for the adjustment.2 Press Setup and find ‘MAINTENANCE’ by pressingor >.3 Press Start/Enter and scroll to ‘ADJUST SHADING’by pressing < or >.4 Press Start/Enter.The machine starts to scan the document to adjustShading, and it displays ‘SHADING...’. If there’s nodocument loaded, the display prompts you ‘LOADWHITE DOC.’ with a beep. Insert a WHITE paper andpress Start/Enter to start it.After feeding the document, it returns to StandbyMode.