Samsung SF-4300 User Manual

Contents

Discard SizeWhen receiving a document as long as or longer than the paper installedin your machine, you can set the machine to discard any excess image atthe bottom of the page to fit into the recording paper size.If the received page is outside the margin you set, it will be printed ontwo sheets of paper at the actual size.If the Auto Reduction feature is turned on, it will be reduced to fit intothe appropriate size paper (Discard does not take place). If the AutoReduction feature is turned Off or fails, the data within the margin will bediscarded.Enter the desired discard size (from 0 to 30 mm).Ring Before AnswerSelect the number of times your machines rings before answering anincoming call. If you use an answering machine which is connected to theExt. Tel jack on your SmartJet, we suggest you to set this option less thanthe setting on the answering machine.Enter the desired ring number (from 1 to 7).ECMThis mode compensates for poor line quality and ensures accurate, error-free transmission with any other ECM-equipped facsimile machine. If theline quality is poor, transmission time may be increased when ECM isenabled. ECM mode will be activated when you send a fax using theMEM TX button.To turn this feature on, select On.To turn this feature off, select Off.Auto ReductionWhen receiving a document as long as or longer than the paper installedin your machine, the machine can reduce the data in the document to fitinto your recording paper sizeTurn on this feature if you want to reduce an incoming page that mayotherwise need to be divided into two pages with only a few centimeterson the second page. If the fax machine cannot reduce the data to fit intoone page with the feature enabled, the data is divided and printed inactual size on two or more sheets if needed.Select On to turn this feature on.Select Off to turn this feature off. The overflow data will be printed outon a second page.2.43Faxing and Copying2 Operation06-Copy&Fax 2/5/99 9:45 AM Page 19