Samsung TRI BAND SGH-P400 User Manual

Also see for SGH-P400: Quick reference card Service manual Service manual

Contents

Samsung TRI BAND SGH-P400 User Manual Manual pdf 48 page image

Call Records90Delete All (Menu 3.4)This menu allows you to delete all of the records ineach call type. You can also delete all of your callrecords at one time.When a confirming message displays, press the Yessoft key to confirm.Call Time (Menu 3.5)This menu lets you view the timers for calls madeand received.Note: The actual time invoiced for calls by yourservice provider may vary, depending onnetwork features, rounding-off for billingpurposes and so on.The following timers are available:Last Call Time: length of the last call.Total Sent: total length of all calls made since thetimer was last reset.To Press theselect a call type toclearor key. To delete allof your call records, selectAll Calls.place a check mark Mark soft key.remove a check mark Unmark soft key.delete the markedmessagesDelete soft key.Call Records91Total Received: total length of all calls receivedsince the timer was last reset.Reset Timers: option used to reset the call timers.You must first enter the phone password (seepage 145) and then press the OK soft key.Call Cost (Menu 3.6)This network feature lets you view the cost of calls.This menu may not be shown depending on yourSIM card.The following options are available:Last Call Cost: cost of the last call made.Total Cost: total cost of all calls made since thecost counter was last reset. If the total cost exceedsthe maximum cost set in the Set Max Cost option,you can no longer make any calls until you reset thecounter.Max Cost: maximum cost set in the Set Max Costoption. See below.Reset Counters: option used to reset the costcounter. You must first enter your PIN2 (seepage 147) and then press the OK soft key.Set Max Cost: option used to enter the maximumcost that you authorise for your calls. You must firstenter your PIN2 (see page 147) and then press theOK soft key.Price/Unit: option used to set the cost of one unit;this price per unit is applied when calculating thecost of your calls. You must first enter your PIN2(see page 147) and then press the OK soft key.