Samsung VP-D353 Service Manual

Also see for SC-D351: Owner's manual Owner's instruction manual Owner's instruction book Owner's instruction book Owner's instruction book

Contents

Alignment and Adjustments3-3Samsung Electronics3-2 Camera AdjustmentNote : How to adjust the camera system.1) EEPROM stores confirmed adjustment value of each adjustment step.2) DSP (Digital Signal Process : ICM01-Main PCB) digitalizes the camera signal.3) When changing IC505-Main PCB of EEPROM, readjust Main PCB.While changing LCD PCB and CVF PCB- always readjust each part.Since EEPROM stores confirmed adjustment value of each adjustment step, readjusting must be performed in orderto store the changed data.4) Adjust the following items after changing LENS Ass’y.Œ Lens Zoom Track´ Auto HALLˇ Auto IRIS5) Adjust the following items after changing EEPROM and Camera Main PCB.Œ Lens Zoom Track´ Zoom VR Centerˇ Auto HALL¨ Auto IRISˆ Auto White Balance (indoor)Ø Auto White Balance (outdoor)3-2-1 Adjustment Preparation1) Before you startŒ Use the buttons on the CAMCORDER when adjusting Camera.´ When changing the adjustment item, please press the “EASY-Q” and “DISPLAY” buttons on theCAMCORDER.ˇ The adjustment value can be changed by moving the “MENU Selector” Left or Right.¨ Press the “MENU Selector” to store each adjustment into EEPROM.ˆ The OSD shows “OK” after finishing each adjustment step.Ø In order to exit the adjustment mode, disconnect the power source.2) Function of each buttons on the Sst KeyButtons DescriptionMENU Selector push (Confirm) Stores changed value in the adjustment and auto adjustment mode.MENU Selector Right (Data Down) Changes data in the adjustment state.MENU Selector Left (Data Up)EASY-Q (Mode Up) Changes mode.DISPLAY (Mode Down)