Alignment and Adjustments3-13Samsung Electronics3-3-5(b) Tracking adjustmentŒ Play Back the alignment tape.´ Turn P3 to flatten the waveform at the inlet.ˇ Turn P7 to flatten the waveform at the outlet.3-3-5(c) Take Up Path AdjustmentŒ Play back the alignment tape, and confirm that the tape is not twisted between the Guide Roller T andCapstan. (Fig. 3-17)´ Set to REV mode and observe the outlet waveform of PB RF signal. (Fig. 3-18)NOTE : If the outlet waveform is out-of-spec, replace the Arm Review or the Arm Pinch Ass’y,and redo steps 1 and 2.P9P8 P7P6 P4P3MOTOR CAPSTANFig. 3-17(DEFECTIVE) (CORRECT)Fig. 3-18
