Samsung VP-D353 Service Manual

Also see for SC-D351: Owner's manual Owner's instruction manual Owner's instruction book Owner's instruction book Owner's instruction book

Contents

Disassembly and Reassembly4-13Samsung Electronics4-2-8 Guide Roller S,T , Pole Base S,T , Gear Loading S,T Ass’y4-2-8(a) Disassembly1) Lift up the Pole Base S Œ(T ˇ) Ass’y form the linkof the Gear Loading S ´(T ¨) Ass’y.2) Turn the S ˆ and T Ø Guide Rollers counterclockwise to remove them.3) Separate the hook of the Gear Loading S ´ andlift down the Gear Loading S ´(T ¨) Ass’y.623GUIDE ROLLER S ˆˇ POLE BASE T ASS'YPOLE BASE S ASSY ŒØ GUIDE ROLLER TGEAR LOADING S ASS'Y ´∏ MAIN CHASSIS¨ GEAR LOADING T ASS'Y4-2-8(b) Reassembly1) Turn the S ˆ and T Ø Guide Rollers clockwise andreassemble.2) Replace the S ´ and T ¨ Gear Loading assemblies.3) Fit the Pole Base S Œ(T ˇ) Ass’y in the link of theGear Loading S ´(T ¨) Ass’y.Fig. 4-18 Guide Roller S,T , Pole Base S,T , Gear Loading S,T Ass’yNote1 : When disassembling and reassembling, becareful not to touch the GuideRoller S ˆ and T Ø.Note2 : When disassemblig and reassembling theGuide Roller S ˆ and T Ø, be careful not todeform the Gear Loading S ´ and T ¨ Ass’y.Note 1 : When reassembling, confirm the assemblepoint.Note 2 : Disassembly and reassembly is done in theUnload mode.Note 3 : After assembling, make sure that loading andunloading work correctly by applying 3V~5Vto the Loading Motor.