3-4Alignment and AdjustmentsSamsung Electronics5) How to set up the camera adjustment mode[STEP 1]Œ Connect the Power source.´ Set the Power Switch to “CAM” position and Mode Switch to “TAPE” position.[STEP 2]Œ Press and hold the "STOP" and "PB ZOOM" buttons on the video camera at the same time for more than5 seconds.´ When monitor OSD appears as shown Fig. 3-5, the adjustment mode has been activated successfully.ˇ Move the “MENU Selector” to highlight CAM ADJ and push the “MENU Selector”.¨ Monitor OSD shows Fig. 3-6.Then Camera adjustment mode has been activated successfully.[STEP 3]In order to complete the adjustment the power must be reset.This can be done by disconnecting and reconnecting the power source.Fig. 3-5Fig. 3-4MENU ButtonEASY Q ButtonStart/Stop ButtonMENU SelectorDISPLAY ButtonMode switchPB ZOOM Power switchSTOP ButtonDVUSBAVMIC
