22Menu OperationDirect OperationChoose Computer by pressing INPUT button on the top control orCOMPUTER button on the remote control.Before using these buttons, correct input source should be selectedthrough menu operation as described below.Press the MENU button to display the On-Screen Menu. PressPoint 7 8 buttons to move the red frame pointer to INPUTMenu icon.Press Point d button to move the red arrow pointer toComputer and then press SELECT button. The Source SelectMenu will appear.12INPUT buttonComputerVideoINPUT MENUInput Menu iconInput Source SelectionComputer InputMove the pointer to the correct input source and press SELECTbutton.3When the input source is coming from a computerthrough the COMPUTER IN / COMPONENT INterminal, select RGB.RGBRGB (Scart)Component ☞ " Selecting Input Source (Component / RGB-Scart21-pin ) " P31.Move the pointer (redarrow) to Computer andpress SELECT button.Move the pointer to RGB andpress the SELECT button.Source Select Menu☞ " Selecting Input Source (Component / RGB-Scart21-pin ) " P31.