24Computer InputAuto PC AdjustmentAuto PC Adjustment function is provided to automatically conform Fine sync, Total dots and Picture Position to yourcomputer. This function can be operated as follows.Press the MENU button to display the On-Screen Menu. PressPoint 7 8 button to move the red frame pointer to PC AdjustMenu icon.12 Press the Point d button to move the red frame pointer to AutoPC Adj. icon and then press the SELECT button twice.This Auto PC Adjustment can be also executed by pressing theAuto PC button on the remote control.Move the red frame pointer to Auto PCAdj. icon and press SELECT button.PC ADJUST MENUAuto PC Adj. PC Adjust Menu iconTo store adjustment parameters :Adjustment parameters from Auto PC Adjustment can be memorizedin this projector. Once parameters are memorized, the setting can bedone just by selecting Mode in PC System Menu ( ☞ P23 ). Refer to" Store " of Manual PC Adjustment section ( ☞ 26 ).Note :– Fine sync, Total dots and Picture Position of some computers can not befully adjusted with this Auto PC Adjustment function. When the image isnot provided properly through this function, manual adjustments arerequired. ( ☞ P25 )– Auto PC Adjustment function cannot be operated when “480p”, “575p”,“480i”, “575i”, “720p (HDTV),” “1035i (HDTV)” or “1080i (HDTV)” isselected on PC SYSTEM Menu ( ☞ P23).PC Adjustment