Sanyo PLC-SW30 Owner's Manual

Also see for plc sw30 - SVGA LCD Projector: Specifications Service manual Service manual Service manual Owner's manual

29Computer InputScreen Size AdjustmentThis projector has a picture screen resize function, which enables you to display the desirable image size.Press MENU button to display the On-Screen Menu. PressPoint 7 8 buttons to move the red frame pointer to ScreenMenu icon.When Digital zoom + is selected, the On-Screen Menu disappearsand the message “D. Zoom +” is displayed. Press SELECT buttonto expand image size. And press Point ed7 8 buttons to pan theimage. The panning function can work only when the image is largerthan screen size.A projected image can be also expanded by pressing D.ZOOM ebutton on the remote control.1To cancel Digital Zoom +/– mode, press any button except D.ZOOMed, SELECT and Point buttons.Move the red frame to the functionand press SELECT button.Press Point d button to move the red frame pointer to thefunction that you want to select. Then press SELECT button.2WideDigital zoom +Note:– This Screen Menu cannot be operated when“720p (HDTV)”, “1035i (HDTV)” or “1080i(HDTV)” is selected on PC System Menu. ( ☞ P23 ).– True and Digital zoom +/– cannot be selectedwhen “480i ”, " 575i ", " 480p ", " 575p " isselected on PC System Menu (☞ P23 ).– This projector cannot display any resolutionhigher than 1280 X 1024. If your computer’sscreen resolution is higher than 1280 X 1024,reset the resolution to the lower beforeconnecting projector.– The image data in other than SVGA (800 x 600)is modified to fit the screen size in initial mode.– The panning function may not operate properlyif the computer system prepared on PC AdjustMenu is used.Provides an image to fit screen size.NormalTrueSCREEN MENUWhen Digital zoom – is selected, the On-Screen Menu disappearsand the message “D. Zoom –” is displayed. Press SELECT buttonto compress image size.A projected image can be also compressed by pressing D.ZOOM ▼button on the remote control.Digital zoom –Provides image in its original size. When the original image size islarger than screen size ( 800 x 600 ), this projector enters “Digitalzoom +” mode automatically.Provides image to fit wide video aspect ratio (16 : 9) by expandingimage width uniformly. This function can be used for providing asqueezed video signal at 16 : 9.Screen Menu