25Computer InputManual PC AdjustmentSome computers employ special signal formats which may not be tuned by Multi-Scan system of this projector. In thiscase, the projector cannot reproduce a proper image and the image may be recognized as a flickering picture, a non-synchronized picture, a non-centered picture or a skewed picture.The Manual PC Adjustment function allows you to precisely adjust several parameters to match those special signalformats. You can store those adjusted parameters in the 5 independent memory areas, enabling you to call up wheneveryou need.Press MENU button to display the On-Screen Menu. Press Point7 8 buttons to move the red frame pointer to PC Adjust Menuicon.12 Press Point d button to move the red frame pointer to the itemthat you want to adjust and then press SELECT button.Adjustment dialog box will appear. Press Point 7 8 buttons toadjust value.Move the red frame pointer to the itemand press SELECT button.PC ADJUST MENUPC Adjust Menu iconAdjusts an image as necessary to eliminate flicker from the display.Press Point 7 8 buttons to adjust value.(From 0 to 31.)Fine syncAdjusts the number of total dots in one horizontal period. PressPoint 7 8 buttons and adjust number to match your PC image.Total dotsAdjusts horizontal picture position. Press Point 7 8 buttons toadjust the position.HorizontalAdjusts vertical picture position. Press Point 7 8 buttons to adjustthe position.VerticalPress SELECT button to show the information of computer selected.Current modeAdjusts clamp level. When the image has a dark bar(s), try thisadjustment.ClampPress SELECT button at this iconto adjust “Clamp,” “Display area(H/V)” or set “Full screen.”Press Point 7 8 buttons toadjust the value.Shows status(Stored / Free) of theselected Mode.Selected ModePress SELECT button atCurrent mode icon to showthe information of computerconnected.Current mode