Sanyo PLC-SW30 Owner's Manual

Also see for plc sw30 - SVGA LCD Projector: Specifications Service manual Service manual Service manual Owner's manual

9OverviewTop panelPOWER LAMPREPLACEWARNINGINPUTMENUON-OFFSELECTVOLUME–VOLUME+ewqu ytrii POWER indicatorFlashes red until the projector gets ready to be turnedon. It turns red when the projector is in the stand-bymode. It remains green while the projector is inoperation. ( ☞ P19,37,42 )q POWER ON-OFF buttonTurns the projector on or off. ( ☞ P19 )w SELECT button– Executes the selected item. ( ☞ P17 )– Expands / compresses the image in Digital Zoommode. ( ☞ P29 )r MENU buttonOpens or closes the On-Screen Menu. ( ☞ P17 )t INPUT buttonSelects input source. ( ☞ P22,P30 )e Point eedd7 8 ( VOLUME + / – ) buttons– Select an item or adjust value in the On-Screen Menu.( ☞ P17 )– Pan the image in DIGITAL ZOOM +/– mode. ( ☞ P29 )– Adjust volume level. (Point 7 8 buttons) ( ☞ P21 )y LAMP REPLACE indicatorTurns yellow when the life of the projection lamp drawsto an end. ( ☞ P40 )u WARNING indicatorLights red when the projector is in the abnormalcondition. This indicator also flashes red when theinternal projector temperature goes up over theoperating range. ( ☞ P42 )