23Computer InputComputer System SelectionThis projector automatically tunes to various types of computers based on VGA, SVGA, XGA or SXGA with its Multi-scansystem and Auto PC Adjustment. If Computer is selected as a signal source, this projector automatically detects the signalformat and tunes to project a proper image without any additional setting. (Signal formats provided in this projector isshown on page 49 )When projector cannot recognize connected signal as PCsystem provided in this projector, Auto PC Adjustmentfunction operates to adjust projector and the message“Auto” is displayed on System Menu icon. (☞ P24.)When image is not provided properly, manual adjustmentis required. (☞ P25 - 26 )There is no signal input from computer. Make sure theconnection of computer and a projector is set correctly.(☞ " Troubleshooting" P44 )Auto-----System Menu iconDisplays system beingselected.PC SYSTEM MENUSelecting Computer System ManuallySYSTEM Menu iconDisplays system being selected.The systems on this dialog boxcan be selected.Press MENU button to display the On-Screen Menu. Press Point7 8 buttons to move the red frame pointer to PC SYSTEMMenu icon.Press Point d button to move the red arrow pointer to thesystem that you want to set, and then press SELECT button.12PC SYSTEM MENUCustom Mode (1–5) set in PCAdjust Menu. ( ☞ P24-26 )PC system can be also selected manually.Note : The projector may display one of the following messages.User preset adjustment in Computer Adjustment.Adjustment data can be stored in Mode 1 - 5. ( ☞ P25-26 )Mode 1Computer systems provided in the projector. Theprojector chooses a proper system and displays it.SVGA 1*Mode 1 and SVGA 1 are examples.