31Video inputInput Source Selection ( Component, RGB Scart 21-pin )Menu OperationDirect OperationChoose Computer by pressing INPUT button on the top control orCOMPUTER button on the remote control.Before using these buttons, correct input source should be selectedthrough menu operation as described below.Press MENU button to display the On-Screen Menu. PressPoint 7 8 button to move the red frame pointer to INPUT Menuicon.Press Point d button to move the red arrow pointer toComputer and then press SELECT button. The Source SelectMenu will appear.12INPUT buttonVideoComputerMove the pointer to the source that you want to select and thenpress SELECT button.3 INPUT MENUMove the pointer (redarrow) to Computer andpress SELECT button.Move the pointer toComponent or RGB ( Scart )and press the SELECT button.Source Select MenuWhen the input source is coming from videoequipment connected to the COMPUTER IN/COMPONENT IN terminal with a Component-VGACable, select Component.ComponentWhen the input source is coming from videoequipment connected to the COMPUTER IN/COMPONENT IN terminal with a Scart-VGA Cable,select RGB (Scart).RGB (Scart)Note :Component-VGA Cable and Scart-VGA Cable are optionally supplied. See page51 for order.Input Menu icon