Sanyo PLC-WL2500A Manual

Also see for PLC-WL2500A: Owner's manual Manual Quick reference guide Owner's manual Specifications

Contents

Sanyo PLC-WL2500A Manual Manual pdf 26 page image

PLC-WL2500A / WL2501A/ WL2503A Expand Serial Command Functional Specifications25/728.6.2 CF_SOURCE CommandCommand “CF_SOURCE_%1”[CR]%1Input isComputer 1“ANALOG” --------- Select Analog Input“YPBPR” ----------- Select Component Input“SCART” ----------- Select Scart Input”UP” ---------------- Switch Input as followsAnalog →YPBPR →Scart →…”DN” ---------------- Switch Input as followsScart →YPBPR →Analog →…Input isComputer 2““ANALOG” --------- Select Analog Input”UP””DN”Projector accepts parameter ”UP”/”DN” but no operation is made.Input is HDMI“HDMI” ----------- Select HDMI Input”UP””DN”Projector accepts parameter ”UP”/”DN” but no operation is made.Input is Video“VIDEO” ------------- Select Composite Video Input”UP””DN”Projector accepts parameter ”UP”/”DN” but no operation is made.Input isS-videoS-VIDEO ------------- Select S-video Input”UP””DN”Projector accepts parameter ”UP”/”DN” but no operation is made.DetailsSelect Source of currently selected InputWhen Input specified by %1 is inappropriate for selected Input, the projectorreturns “101” and the command is not executed.This command is available in normal Power ON status.Response Acceptable “000”[CR]Unacceptable “Error Code”[CR]8.6.3 CF_INPUT1 CommandCommand “CF_INPUT1_%1_”[CR]%1“ANALOG” ---------- Select Analog RGB Input“YPBPR” ------------- Select Component“SCART” ------------- Select SCARTDetails Select Input - Computer 1 and source specified in %1 at once.This command is available in normal Power ON status.Response Acceptable “000”[CR]Unacceptable “Error Code”[CR]8.6.4 CF_INPUT2 CommandCommand “CF_INPUT2_%1_”[CR]%1 “ANALOG” ---------- Select Analog RGB InputDetailsSelect Input - Computer 2 and source specified in %1 at once.This command is available in normal Power ON status.Projector returns “101” by selecting Computer 2 while Monitor out is selected inTerminal menu.Response Acceptable “000”[CR]Unacceptable “Error Code”[CR]