Sanyo PLC-WL2500A Manual

Also see for PLC-WL2500A: Owner's manual Manual Quick reference guide Owner's manual Specifications

Contents

Sanyo PLC-WL2500A Manual Manual pdf 27 page image

PLC-WL2500A / WL2501A/ WL2503A Expand Serial Command Functional Specifications26/728.6.5 CF_INPUT3 CommandCommand “CF_INPUT3_%1_”[CR]%1 “HDMI” ------------------ Select HDMIDetails Select HDMI Input and source specified in %1 at once.This command is available in normal Power ON status.Response Acceptable “000”[CR]Unacceptable “Error Code”[CR]8.6.6 CF_INPUT4 CommandCommand “CF_INPUT4 _%1”[CR]%1 “VIDEO” ----------------- Select Composite video InputDetails Select Video input and source specified in %1 at once..This command is available in normal Power ON status.Response Acceptable “000”[CR]Unacceptable “Error Code”[CR]8.6.7 CF_INPUT5 CommandCommand “CF_INPUT5 _%1”[CR]%1 “S-VIDEO” ----------------- Select S-video InputDetails Select S-video input and source specified in %1 at once..This command is available in normal Power ON status.Response Acceptable “000”[CR]Unacceptable “Error Code”[CR]8.6.8 CF_INPUT_%1_%2 CommandCommand “CF_INPUT_%1_%2”[CR]%1“COMPUTER1” ------ Select Computer1 Input“COMPUTER2” ------ Select Computer2 Input“HDMI” ------------------ Select HDMI Input“VIDEO” ---------------- Select Video Input“S-VIDEO” ------------- Select S-video Input%2When %1 is COMPUTER1ANALOG” ------ Select Analog RGB Input“YPBPR” -------- Select Component Input“SCART” -------- Select SCART InputWhen %1 is COMPUTER2“ANALOG” ----- Select Analog RGB InputWhen %1 is HDMI“HDMI” ---------- Select HDMI InputWhen %1 is VIDEO“VIDEO” --------- Select Video InputWhen %1 is S- VIDEO“S-VIDEO” ------ Select S-Video InputDetailsSelect Input specified by %1 and also Source specified in %2This command is available in normal Power ON status.Projector returns “101” by selecting Computer 2 while Monitor out is selected inTerminal menu.Response Acceptable “000”[CR]Unacceptable “Error Code”[CR]