Sanyo PLC-WL2503 Owner's Manual

Also see for PLC-WL2503: Command list Manual Manual Specifications Owner's manual

Contents

39Video System Selection1 AV System Menu (Video or S-video)AV System Menu (Component)2If the projector can not reproduce proper video image,select a specific broadcast signal format from among PAL,SECAM, NTSC, NTSC 4 43, PAL-M, and PAL-N.PAL/SECAM/NTSC/NTSC4 43/PAL-M/PAL-NThe projector automatically detects an incoming videosignal, and adjusts itself to optimize its performance.If the projector can not reproduce proper video image, selecta specific component video signal format from among 480i,575i, 480p, 575p, 720p, 1035i, and 1080i.AutoCOMPONENT VIDEO SIGNAL FORMATThe projector automatically detects an incoming videosystem, and adjusts itself to optimize its performance.When Video System is PAL-M or PAL-N, select the systemmanually.AutoNote:The AV System Menu can not be selected when selectingRGB (Scart) or HDMI.Press the MENU button to display the On-ScreenMenu. Use the Point ▲▼ buttons to select Input andthen press the Point ► or the SELECT button.Use the Point ▲▼ buttons to select Video or S-videoor Computer 1(Component) and then press theSELECT button.3 Use the Point ▲▼ buttons to select System and thenpress the Point ► or the SELECT button. Use thePoint ▲▼ buttons to select the desired system andthen press the SELECT button.Video InputComponentVideo or S-videoDownloaded From projector-manual.com Sanyo Manuals