Sanyo PLC-WL2503 Owner's Manual

Also see for PLC-WL2503: Command list Manual Manual Specifications Owner's manual

Contents

62Cleaning the Projector CabinetCleaning the Projection LensUnplug the AC power cord before cleaning.Gently wipe the projection lens with a cleaning cloth thatcontains a small amount of non-abrasive camera lenscleaner, or use a lens cleaning paper or commerciallyavailable air blower to clean the lens.Avoid using an excessive amount of cleaner. Abrasivecleaners, solvents, or other harsh chemicals might scratchthe surface of the lens.Unplug the AC power cord before cleaning.Gently wipe the projector body with a soft dry cleaning cloth.When the cabinet is heavily soiled, use a small amount ofmild detergent and finish with a soft dry cleaning cloth. Avoidusing an excessive amount of cleaner. Abrasive cleaners,solvents, or other harsh chemicals might scratch the surfaceof the cabinet.When the projector is not in use, put the projector inan appropriate carrying case to protect it from dust andscratches.Maintenance and CleaningCAUTIONDo not use any flammable solvents or air sprayson the projector and in its vicinity. The explosionor fire hazard may occur even after the AC powercord is unplugged because the temperature insidethe projector is extremely high due to the lamps. Inaddition, there is a risk that the internal parts maybe damaged not only by the flammable air spray butalso by the cold air.When moving the projector or while it is not in use, replacethe lens cover.12Thread the string through the hole on the lens coverand then pull at it in the string to secure it in place.To pass the other end of the string into the hole on thebottom of the projector, thread the lens cover throughthe string and then pull at it.Attaching the Lens CoverDownloaded From projector-manual.com Sanyo Manuals