Sanyo PLC-WL2503 Owner's Manual

Also see for PLC-WL2503: Command list Manual Manual Specifications Owner's manual

Contents

54Remote controlThis projector provides two different remote control codes:the factory-set initial code (Code 1) and the secondary code(Code 2). This switching function prevents remote controlinterference when operating several projectors or videoequipment at the same time.When operating the projector in Code 2, both the projectorand the remote control must be switched to Code 2.To change the code for the projector:Select either Code 1 or Code 2 in this Setting Menu.To change the code for the remote control:Press and hold both the MENU and IMAGE buttonstogether for 5 seconds or more. After changing the code,make sure the remote control operates properly.Note:• When different codes are set on the projector and on theremote control, any operation can not be made. In thatcase, switch the code on the remote control to fit the codeon the projector.• If the batteries are removed from the remote control for along period of time, the remote control code will be reset.This function allows you to change brightness of the screen.Normal ...... Normal brightness.Eco ........... Lower brightness reduces the lamp powerconsumption and extends the lamp life.SettingLamp controlRemote controlDownloaded From projector-manual.com Sanyo Manuals