4. MODE LOCK AND MODE SELECTOR KEYS EO1-111524.1 Mode Lock4- 14. MODE LOCK AND MODE SELECTOR KEYS4.1 Mode Lock4.2 Mode Selector KeysREG Key: The REG Key is used by the cashier or clerk who operates the ECR.This key can access the positions of LOCK and REG of the Mode Lock.MA Key: The MA Key is used by the store manager who will daily supervise thecollection of money and the printout of transactions recorded by theECR. This key is also used when programming the ECR. This key canaccess the positions of SET, LOCK, REG, X, MGR, - and Z.S Key: The S Key is used by the service person from TOSHIBA TECrepresentative to access any position. To prevent programmed dataand sales data from being changed or cleared by mistake, do not usethis key without instructions of our TOSHIBA TEC representative.The keys may be inserted or pulled out at the “LOCK” or “REG” position.In the OPERATOR’S GUIDE, functions and operations will be described within the range of the Mode Lockpositions of LOCK and REG using the REG key. Since operations requiring other positions and keys arecontrolled by the store manager, they are described in the MANAGER’S GUIDE.SETZXREGMGR (POSITION) (FUNCTION)SET In this position, the ECR will allow programmingoperations.(LOCK position) The register operations arelocked when the Mode Lock is in this position.Meanwhile, the Display Message and the currenttime are displayed.REG Normal cash register operations are carried out inthis mode. However, the operations requiring aManager Intervention cannot be performed in thismode.X The sale totals in memory can be read and theprogrammed data can be verified in this position.MGR This position allows to register all normal cashregister operations to be carried out in the “REG”mode and the operations requiring a ManagerIntervention.This is the “Negative Mode” which automaticallyprocesses all the entries in the reverse way, i.e.positive items into negative, and the negative intopositive. It is usually used to return or cancel allthe items once purchased in a sale in the “REG”or “MGR” mode.Z All the resettable totals and their respectivecounters in memory will be read and reset in thisposition.MAKeyREGKeyMAS REG