13. OTHER OPERATIONS RELATING TO IN-LINE SERVICE EO1-1115213.2 Suspending13- 213.2 SuspendingThis is to be operated for the purpose of suspending an in-line service being executed, when any terminalsremain unserviced, and of going on to a “RETRY”, “INCOMPLETE ENDING”, or “CANCEL” operation as the nextstep.OPERATION ON MASTER TERMINAL: (Same Lock positions as the in-line job being performed)Depress [ITEM CORR] until the key-in tone is generated.DESCRIPTION:The SUSPENDING operation is allowed any time during an in-line service procedure.If suspending by the [ITEM CORR] key is accepted, the Master Terminal’s display indicates the number ofunserviced terminals. (SUSPENDING of a service execution of one terminal is not possible). Now a“RETRY” or “INCOMPLETE ENDING” operation can be selected as the next step. (When no key-inoperations are made in about 10 seconds after a SUSPENDING operation, a RETRY process willautomatically be executed.)13.3 RetryThis is to be operated for the purpose of re-attempting the in-line service that has been stopped due to “TIMEOUT” or that has just been suspended by “SUSPENDING” operation.OPERATION ON MASTER TERMINAL: (Same Lock positions as the in-line job being performed)Depress [AT/TL].DESCRIPTION:The in-line service will again be attempted to the unserviced terminals. This operation is possible anynumber of times after a “TIME OUT” condition or a “SUSPENDING” operation as long as any terminalsremain unserviced. (When no key-in operations are made in about 10 seconds after a SUSPENDINGoperation, a RETRY process will automatically be executed.)13.4 Incomplete EndingThis is to be operated to abandon services to unserviced terminals, and ends the in-line service with the servicesto service-completed terminals only.OPERATION ON MASTER TERMINAL: (Same Lock positions as the in-line job being performed)Depress [NS].DESCRIPTION:If an in-line service being executed does not seem to end normally due perhaps to some abnormal status ofany Satellite Terminals after “TIME OUT”, “SUSPENDING”, and/or “RETRY” operations, the [NS] key can bedepressed to end the in-line service with only the service-completed terminals serviced and the unservicedterminals remaining unserviced. In case of In-line X or Z Report Collection sequences, reports of only theservice-completed terminals will be issued.As part of the print out, the Store/Register No. of the terminal and its status will be printed.