7. CASHIER SIGNING OR CASHIER KEY OPERATIONS EO1-111527.1 Cashier Code Entry7- 2(2) For Multi-drawer MachinesSign-ON [@/FOR] [LOG/RECEIPT]2-digit manager-assign code (01 to 99)2-digit cashier’s own secret code (01 to 99)1 or 2 as Drawer No.By entering a Drawer No., the designated drawer will open on finalizing each sale by that cashier. It will cause anerror if a Drawer No. already used by another cashier is entered.Sign-OUTSign-IN Same as those for Single-drawer Machines.Sign-OFFNOTES: 1. A maximum of 2 different cashiers may sign-ON on a Multi-drawer Machine at the same time. Toallow more than one cashier’s Sign-ON, the first cashier(s) must sign-OFF before the next cashiersigns ON. Accordingly, only the cashier being signed ON or IN can sign OUT or OFF.2. When the Drawer No. entry and the [@/FOR] key are skipped in a Sign-ON, the drawers willautomatically be assigned to the cashiers from the smaller No. to the larger.3. Performing Sign-OFF automatically cancels the designation of the drawer. Therefore, at the nextopportunity to perform Sign-ON, the designation of another drawer is available. Performing Sign-OUT cannot cancel the designation of the drawer.(3) Mode Changes With Signing OperationsWhen Signed-ON or Signed-IN:The Mode Lock position changes are allowed within “LOCK”, “REG”, “MGR”, and “ - ”. Changing to any otherposition will be an error.When Signed-OUT:The Mode Lock may be turned to any position. However, cashier reports of the cashier being signed OUTcannot be taken in the “X” or “Z” position.When Signed-OFF:The Mode Lock may be turned to any position. Therefore, it is best for the cashier (or all the cashiers on aMulti-drawer Machine) to sign-OFF before the Mode Lock is turned to the “LOCK”, “X”, “Z”, or “SET” position.
