User Function Menu 35Altering UserOptionsIf you are not sure what user function menu optionsare available, enter user function menu entry mode,and scroll through the list of menu options.Note: The menu options CALL QUE, DIVERT,PROG SIG and PROG GRP allow you to accessuser programmable features. The tableabove gives reference pages for these features.Accessing the User Function Menu1. Press the function key ( ) to enter userfunction menu entry mode. The scrollingavailable indicator ( ) appears in the controlhead display.2. Use the up and down scroll keys ( / )to move through the list of menu options.3. To leave user function menu entry mode, pressanother mode key (function, call, status, channelor alphanumeric).DTMF BUF/NOR Switches the DTMF dialing type betweenbuffered (tones sent together) and nor-mal (tones sent as each key is pressed).CALL QUE Accesses call queue entry mode. See “CallQueuing” on page 36.DIVERT Accesses call diversion setup mode. See“Call Diversion” on page 38.PROG SIG Accesses signal programming mode. See“Programmable Channel Signaling” onpage 40.PROG GRP Accesses group programming mode. See“Programmable Scanning and VotingGroups” on page 42.Display Settings Meaning